electronicadelhogar

Mostrar Mensajes

Esta sección te permite ver todos los posts escritos por este usuario. Ten en cuenta que sólo puedes ver los posts escritos en zonas a las que tienes acceso en este momento.


Temas - fox71

Páginas: [1]
1
EnigmaII / PKT_GM7162_E2_HYPERION_v3_flash
« en: 23 Noviembre 2013, 19:54:30 »

2
EnigmaII / protoplex v3
« en: 29 Octubre 2013, 09:43:18 »
http://dfiles.eu/files/mirixft4y




ne;w03;3af4 EOS-Team
present

ProtoPlex V3

(basierend auf OE2.0)

i;nf;o888 was ist alles drin?
- volle Tunerunterstützung (beide DVB-S2 und auch DVB-T/C T2/C funzen)
- EOS-Panel
- WebIf ver. 1.7.1
- Videowizard auf v.format
- WLAN Unterstützung (Treiber getestet: rt3070, rt5370, rtl8187, 8712u
- RC-Auswahl: Triplex, Standard
- Receiver Display umschaltbar (auf Senderanzeige oder Display aus)
- Overclocking to 750 MHz
- Red-LED für Deepstandby einstellbar
- schnelleres Backup
- Bootlautstärke einstellbar
- Samba
- PEARL-USB-Display Unterstützung (bereits vorkonfiguriert)
- alle Screenshots über WebIF werden unterstützt
- Webif Bouquetseditor im NF-Design
- Webif WebAdmin im NF-Design
- Autotimer
- Sparkbackup aus E2 heraus: damit kann man unter E2 eine Sicherung seiner Sparksoft machen!
- PIP geht mit allen 3 Tunern (um ein einwandfreies PIP zu erziehlen den DVB-T Tuner auf eure region einstellen auch wenn er nicht genutzt wird)
- second Webif
- neues Skin
- Picon Manager
- Tunerauswahl (zum auswählen des standard tuners)
- Channelselection Picon Vorschau

Was ist neu:
- Neuer Pluginserver für OE2.0
- Overclocking auf 600Mhz voreingestellt
- Aboutscreen mit IP und Wifi
- neue Sleeptimer
- neuer Emumanager der Emu automatisch erkennt der in /var/emu liegt und in Manager einfügt
- Zusatztasten F1+ überarbeitet
- einige kleine Fehler behoben (tuxtxt Umlaute)
- Piconvorschau
- automatische Wlanstickerkennung beim Boot

Tastenbelegung:
V-Format=Videowizard
Prev+Next= Zaphistory
Find=Sendersuche
Tms=Aufnahmepfad einstellen
Blau=PPanel
Portal= Pluginbrowser
F1+Blau=Sendername im Display an
F1+Gelb=Sendername im Display aus
F1+Rot=Reboot
F1+0-9=Emu in Alphabetischer Reihenfolge des /var/emu (oder einstellbares Verzeichniss)
F1+F2=Alle emus stoppen
F1+F3=aktuellen Emus neustarten


3
EnigmaII / PKT_GM7162_E2_HYPERION_v2_flash
« en: 18 Octubre 2013, 20:24:17 »
http://dfiles.eu/files/2ffusiuum



Added by PKT:
[ALL] OpenPLI updated 10-05-2013
[ALL] python2.7 updated
[ARM] fix firmware update from BP
[ARM] fix subtitles
[ALL] add PKT HDMI-CEC Manager [BP->Settings->HDMI Setup]
[ALL] fix making & cleaning devs for pl2303 & ftdi
[ALL] speedup network test
[ARM] enable automount support
[ARM] add missing libs for mytube
[ALL] add HDD Manager to BP-> Disk Menu
[ALL] Partition Manager to BP-> Disk Menu
[ALL] optimize SWAP script
[ALL] fix SWAP start on box with NAND Image
[ALL] update main menu
[ALL] add DLNA client support menu
[ARM] Add missing rtmpdump for WebMedia 10 and other
[ALL] default PIG on exclude ADB
[ALL] IPTV GS fix for ChannelList
[ALL] skip network check in first assistant
[ipbox] add loading RF modulator in rcS if exists
[ADB] fix autorestore
[ALL] removed unsupported Nonlinear format from AspectRatio
[ALL] fix EPG multifunctioning
[ALL] fix Channel Control plugin support
[7162] fix V.Format key for aspect ratio selection
[ALL] fix python 2.7 plugins import from PKTs server
[ALL] fix map ca0 to ca1
{ALL} standby on/off switching speedup & other internal code changes
{ALL} force reboot function deactivated cause doesn't work so far
[SF918,SF1028] Enable extinguish
[ALL] set default OFF hdmicec function: tv_standby, tv_wakeup, active_menu, active_source
[ALL] fix OpenWebif streaming
[GM7162] add switch between DVB-T/C @BP->Settings->Extra Setup
[ALL] according to @data devil - added additional key info in locations: EPGSelectActions ChannelSelectEPGActions
{ALL} added TELETEXT support in KeyMapper : available for red & yellow color keys
[ARM] Add CrossEPG
[arm] add missing libs
{ARM} fix graphEPG fonts for other skins
[ALL] update channel list

[ALL] update djcrash downloader v1.3.0
- add checking server response
- add update local date field after installation

[ALL] update PKT Samba Server Manager v1.5
- add support for Hypercube
- add some new entry to smb.conf

[ALL] update Media player
-set /hdd as default browsing dir
-set config.mediaplayer.defaultDir=/media/
-functionality fixes
- added dynamic OC
[ALL] update EmuManager v1.1.7
-add properly support of wicardd

{ALL} update BluePanel
- speed up
- optimized code
- small fixes
- num & color keys small functionality fix
- exit key fix
- added boxtype exclude

[ALL] add Overclocking Tool v2.0.8
- add management over/down clocking
- add checking oc driver
- add error message when oc driver is not available
- add downclocking CPU in standby support
- enable Fast Boot support
- add lock/unlock button
- add WARNING message
- add Dynamic OC
- add frequency self calculating algorithm to increase available range of values
- add CPU dynamic frequency control in standby mode when recording

{ALL} InfoCenter
-added CPU frequency read online.
-added Net IP

[ALL] update PKT Install Manager v2.7.7
- add support for Hypercube
- add support MultiBoot for GM 990/GM TRIPLEX STB
- fixed exit from Disk Manager
- fix switch between multiboot<->nand_e2
- fix switch between multiboot<->nand_spark
- add Mario Bros cleaning tool
- add additional boot_system check
- set default bootdelay at 10s for gm990
- add reboot button
- add show mounted partition
- add support ext4 file system
- increase choice of size partition from 10GB to 1TB
- add size of left free space
- add excluded extended partition id
- speed up loading install manager & all code in python
- add info when disk or image file is not detected
- add lock installation when disk or image file is not detected
- fix usb and usbhub loading when more than 1 storage device are connected to the STB
- add multiboot for Hypercube

Conditions:
- FAT partition is using for kernels area
- sdx2, sdx3, etc... is using for rootfs
- correctly usb drive partitions can be prepare by Disk manager
- fix refresh status on hypercube
- fix rescan devices after repartition in Disk Manager
- fix detect image to install [hypercube]
- add alternative startup from flash when usb storage can not be initialize [hypercube]
- code optimization

[ALL] Update Backup Manager v2.2
- add support for Hypercube
- add full backup of flash for GM990 / TRIPLEX/ Hypercube
- fix checking free space in /hdd
- set copy settings default off
- add copy of channel list revision
- add selection usb or flash image in whole image backup

Known Issues:
[ADB] PIG can cause unexpected uboot remove due to error decoder design - as written by Jacek
We are working around this problem and some changes in this direction have been made, however we can not guarantee 100% secure
[TRIPLEX] for xxcam use boxtype=ipbox
[ALL] we not recommended make backup of e2 settings when using Backup Manager from older version!

Special THX to TDT group, all sh4 community and all betatesters.

FTP login: root, passwd: pkteam

5
EnigmaII / MP martiiGit by FFTeam 10-10-2013
« en: 17 Octubre 2013, 17:18:27 »

6
EnigmaII / not support AC3+
« en: 04 Octubre 2013, 18:14:22 »
hasta ahora en enigma2  no se oye AC3+, hay alguna solucion!?

Páginas: [1]